Startech USB 3.0 to SATA III Adapter


Startech USB 3.0 to SATA III Adapter

Référence: P123226

Recevez le Entre 16/29 Jours

236,00 Dh


The USB 3.0 to SATA adapter cable , model USB3S2SAT3CB, allows you to connect a hard drive or 2.5 "SATA solid state drive to a computer through an available USB port : the easiest way to expand a computer's hard drive , when adding an external SSD through USB 3.0.

This cable is compatible with UASP, which offers transfer speeds up to 70% faster than conventional USB 3.0, which allows you to take full advantage of the SATA III SSD / HDD when paired with a host controller with UASP available.

This portable adapter has a light weight design and does not require external power, which facilitates its transport in the bag of a laptop. In addition, this cable-style adapter facilitates the exchange of hard drives without having to install the units in a box. Perfect solution that facilitates access to the units to perform migration or data backup, or duplication of units.

The USB3S2SAT3CB is backed by StarTech.com's two-year warranty and free lifetime technical support.

Characteristics:

  • Cable style adapter

  • Support for UASP (specification for SCSI protocol with connection, revision 1.0)

  • Compatible with USB 3.0 / 2.0 / 1.1 (5 Gbps / 480 Mbps / 12 Mbps)

  • Compatible with SATA, versions I / II / III (1.5 / 3.0 / 6.0 Gbps)

  • Powered by USB

Specifications Startech USB 3.0 to SATA III Adapter:

  • Hardware
    • Number of Units 1
    • ASMedia Chip Set ID - ASM1153E
    • USB 3.0 interface
    • Unit size 2.5in
    • Bus Type USB 3.0
    • SATA Compatible Units
    • Fan (s) No
  • performance
    • Maximum Unit Capacity So far it has been tested with hard drives up to 2TB of 5900 RPM
    • Compatibility with UASP Yes
    • General Specifications The maximum power of the connected unit is 900mA
    • Type and Speed
      • USB 3.0 - 5 Gbit / s
      • SATA III (6 Gbps)
  • Connector (s)
    • Connectors of Unit 1 - Combination of power and data by SATA (7 + 15 pins) Receptacle (socket)
    • Host Connectors 1 - USB Type-A (9 pins) USB 3.0 Male
  • software
    • Compatibility OS OS independent; No software or drivers required
    • Observations / Requirements
    • Note The cable works only with 2.5 "SATA drives
    • 3.5 "/ 5.25" units are not compatible
  • Power requirements
    • Power Adapter Included USB Powered
  • Environmental Requirements
    • Moisture HR 40% ~ 85%
    • Storage Temperature -10 ° C to 70 ° C (14 ° F to 158 ° F)
    • Operating Temperature 0 ° C to 60 ° C (32 ° F to 140 ° F)
  • Physical Characteristics
    • Product Height 9 mm [0.4 in]
    • Product Width 49 mm [1.9 in]
    • Product Length 500 mm [19.7 in]
    • Product Weight 41 g [1.4 oz]
  • Box Information
    • Shipping Weight (of the Box) 61 g [2.2 oz]
  • Box contents
  • Included in the box
    • 1 - USB 3.0 adapter cable to 2.5 "SATA hard drive
    • 1 - Instruction Manual
Parcourir également ces catégories : Adaptateurs, Adaptateurs